Fire Rebuild & Reconstruction in Sherman Oaks
Fire rebuilds in Sherman Oaks clad in fiber cement siding, filed with LADBS, with a backyard ADU drawn into the same plans if the lot allows. Cedarline.
Fiber cement planks hold flat under the hard sun and dry wind an inland valley wall faces, where wood lap siding can cup and split at its joints. For a Sherman Oaks house rebuilt after a fire, that board also will not burn, so the cladding adds no fuel to a flame. We draw it over sheathing and a weather barrier, prime every cut edge and paint it a light color that reflects heat.
How the planks go on
Each plank is blind nailed near its top edge into the studs, so the course above hides the fasteners. Butt joints land on framing with a flashing strip behind them, and the boards stop a small gap short of trim, roof edges and paving so water drains past the cut ends. Thin furring strips over the weather barrier form a rain screen that lets the back of the siding dry. Raw edges get primer the day they are cut, since an open edge soaks up water and swells. Corners take trim boards made of the same material.
Permits and a second unit
LADBS handles the permit for a Sherman Oaks rebuild, as it does for every neighborhood of the City of Los Angeles. Our drawings call out the siding, sheathing and weather barrier in one wall detail, and an inspector looks at the barrier laps and window flashings before any plank covers them. If a detached ADU joins the rebuild, it can wear the same planks and colors so both buildings read as one property. Its utility routes are drawn on the site plan from the start, while trenches for the main house are already open.
About Fire Rebuild & ReconstructionAll services in Sherman Oaks
Fire Rebuild & Reconstruction in Sherman Oaks: common questions
The City of Los Angeles ADU rules that apply on the day you file set the limits. A cleared lot gives more freedom over where the unit goes, though setbacks, easements and the paths for sewer, water and power still count. We test a detached layout and an attached one on the survey before you choose.
It comes down to the address. Off the fire hazard severity map, a Sherman Oaks rebuild follows the standard California residential code, which still asks for a rated garage separation and smoke alarms. Should the map show the parcel inside a zone, the plans also meet the state wildfire chapter for vents, roofing and the full exterior wall covering.
While the debris crew and any soil testing work through their own sign-offs, we survey the lot, draw the house and prepare the LADBS submittal. Construction begins once the lot is released for building and the permit is issued, so plan review can be well along by then.
Fire Rebuild & Reconstruction in other cities
Start your fire rebuild & reconstruction in Sherman Oaks
Tell us about the property and the project. We reply with what it involves and how we would price it.